| Customization: | Available |
|---|---|
| After-sales Service: | Free Spare Parts |
| Applicable Material: | Iron/Aluminous/Copper |
|
Still deciding? Get samples of US$ 12000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Use
This equipment is suitable for pipe mouth forming processing, and is mostly used for processing heat exchange products, etc.
2. Features
1). Using hydraulic, pneumatic and electrical control systems, fully considering safety and other factors, it is easy to debug and simple to operate, which can fully meet the production of refrigeration pipe fittings.
2). The equipment control system has an automatic counting function and can accurately count the processing quantity.
3). The equipment has the function of rhythm pause or continuous processing, and can be selected and converted.
4). It has an automatic alarm function. When the equipment fails during operation, it will alarm.
5). When changing products, the mold replacement is convenient, fast and accurate in positioning.
| NO. | Item | Qty | Brand |
| 1 | CNC System | 1 set | JISUN |
| 2 | Cylinder | 1 batch | AIRTAC |
| 3 | Switching Power | 1 pc | MW |
| 4 | Hydraulic motor | 1 pc | JIUTAI |
| 5 | hydraulic oil pump | 1 unit | JIUTAI |
Serial number parameter item content
1 Processing material: copper pipe/aluminum pipe/iron pipe
2 Processing technology Expanding/reducing/pier ring
3 Processing pipe diameter Φ6.0-9.52mm
4 Processing wall thickness 0.5-1.0mm
5 Processing length Vibration plate: 25-80mm
Discharge: 80-200mm
6 Work efficiency 1000-1200PCS/H
7 Up and down clamping method (cylinder bore*stroke) 40*40mm
8 Punch feed method (cylinder bore*stroke) 63*75mm (adjustable 35mm)
9 Depth tolerance ≤0.25mm
10 Coaxiality tolerance ≤0.08mm
11 Processing method Cold forging
12 Drive mode: hydraulic + pneumatic
13. Feeding method: Vibrating plate + discharge
14 Operation mode automatic/manual/jog
15 Electronic control method CNC system
16 Air pressure 0.5-0.8MPa
17 Hydraulic pressure 4-6MPa
18 Power supply mode: three-phase 380V/50HZ
19 Overall dimensions (length x width x height) mm 1600x800x1600
- Check the oil pressure/air pressure pressure every day to ensure reliable use.
- Regularly lubricate each motion component and keep the equipment tidy.
- Regularly clean the equipment inside and outside the equipment. Each sliding surface, screw, oil hole and other oil are not polluting, and all parts do not leak oil or air. The cutting and dirt around the equipment should be cleaned to avoid affecting operation and product quality.
- Equipment working hours are calculated every day at 8-10 hours. If the production time is required for a long time, it is necessary to strengthen the operation and maintenance of accessories such as easy loss of parts and motors to ensure the stability of the equipment.
The finshied produts are prossed by our equipments are widely used in air conditioning, automobile, furniture, water heater, water treatment, medical, high -speed rail, aerospace and other industries, as well More than 200 types of automated equipment were developed.
The main products include all -in -one machines (feeding/pipe end/punching edges/bending pipes), automatic tube ending machine (expansion/shrinkage/rod/flower arrangement), feeder (dandruff/non -dandy), CNC pountyl (drilling) machine, CNC sealing machine, crushing machine, bending machine, automatic angle machine, tube tube machine, ultrasonic cleaning machine, automatic dehumin machine, automatic stuffy header, automatic scoring machine, automatic rolling roller, automatic roller roll Sink machines, pressure test machines, assembly machines, welding furnaces, retirement furnaces, flame welding, high -frequency welding machines, water inspection machines, automatic assembly slot machines, and above equipment can complete high -efficiency mass production for the factory conditions, and have it to have it to have Humanized operation design, stable equipment, simple maintenance, complete types and specifications, and customer provision of personalized design.
Q: Are you a manufacturer or trading company?
A: We are a manufacturer. We are focusing on metal pipe/tube processing machines production.
Q: How to choose the pipe/tube bending machines?
A: You need to tell us the following tube parameters:
- Tube material
- Tube diameter
- Tube thickness
- Tube length
- Tube bending angle
- Tube drawings if possible
Q: What certificate do you have?
A: We have both ISO and CE certificate.
Q: How about your service?
A: Before Sales Serive:
(a)We will provide you with our professional tech.proposal and machine videos for your reference.
(b)We will try our best to answer all the questions and help you solve all the problems.
(c)Welcome to visit our factory!
){kind=link}