Tube Punching and Flanging Machine for Air Conditioning and Refrigeration Fully Automatic CNC

• After-sales Service: 1 Year
• Applicable Material: Copper
• Drive Mode: Electric
• Warranty: 1 Year
• Pipe Diameter Range: 12.7-32mm
• Pipe Length Range: 100-1000mm
• Model NO.: JM-HN-S301A
• Feeding Shaft Stroke: 1500mm
• Feed Shaft Speed: 800mm/Sec
• Processing Methods: Stamping
• Punching Method: Hydraulic
• Feeding Method: Manual
• Operation Method: Auto / Manual / Jog
• Rotating Electric Machine: 400W Servo Motor
• Air Pressure: 0.5~0.8MPa
• Feed Motor: 750W Servo Motor
• Power Mode: Three Phase380V/50Hz
• Transport Package: Wooden Box
• Specification: 1600mmx800mmx1600mm
• Trademark: JISUN
• Origin: China
• HS Code: 8459210000
• Production Capacity: 100 Sets One Year

Product Description

1. Brief Introduction of Tube Punching and Flanging Machine


(a)This equipment is suitable for punching or flanging on the wall of copper and aluminum tubes.

(b)The equipment uses a numerical control system controller, adopts a servo to feed the material with high precision, the hydraulic punching speed is uniform and the effect is good, the numerical control programming operation is simple, and the whole machine is stable.

(c)The equipment control system has an automatic counting function, which can accurately count the processing quantity.
 

2. Equipment Parameter
 

NO.	Parameter items	Content
1	Pipe diameter range	φ12.7-32mm
2	Pipe thickness range	≤1.5mm
3	Pipe length range	100-1000mm
4	Feed axis accuracy	≤0.1mm
5	clamping method (cylinder bore * stroke)	100*15mm
6	Feed mode of punch (oil tank bore * stroke)	80 * 50mm (adjustable 50mm)
7	Feeding shaft stroke	1500mm
8	Feed shaft speed	800mm/sec
9	Processing methods	Stamping
10	Punching method	Hydraulic
11	Drive method	CNC system + servo + pneumatic + hydraulic
12	Feeding method	manual
13	Operation method	Auto / Manual / Jog
14	Rotating electric machine	400W servo motor
15	air pressure	0.5~0.8MPa
16	Feed motor	750W servo motor
17	Power mode	Three phase380V/50HZ
18	Overall dimensions (length X width X height) MM	1600x800x1600

3. List of Main Parts
 

NO.	Name	Quantity	Brand
1	CNC system	1 set	JISUN
2	Servo motor	1 set	DELTA
3	Servo motor	1 set	DELTA
4	Leakage switch	1 piece	CHINT
5	Transparent shell fuse	1 piece	CHINT
6	Switching power	1 piece	MV
7	Intermediate relay	1 set	OMRON
8	Proximity switch	1 batch	YM
9	Pneumatic components	1 batch	AIRTAC
10	Hydraulic components	1 batch	RISEN
11	Hydraulic motor	1 set	JUNTAI
12	Hydraulic oil pump	1 set	JUNTAI

4. Tube Punching and Flanging Samples




5. Tube and Pipe Cutting & Bending & End Forming Machine Maintenance


(a)Check the air / oil pressure and the condition of each fastener daily to ensure reliable use.

(b)Regularly lubricate moving parts and keep the equipment tidy.

(c)Clean the dust of the equipment regularly to avoid affecting the operation and product quality.

(d)The normal working time of the equipment is calculated from 8-10 hours per day. If the working time is longer due to production, the inspection and update of wearing parts, motors and other accessories should be strengthened to ensure the stability of the equipment.

6. Packing & Delivery



7. Services and Others

(a)Product quality is guaranteed for one year, (except for man-made or abnormal use) wearing parts are not included in the scope of warranty. For details, please refer to the "Vulnerable Parts List" in the instruction manual.

(b)The products are delivered to the customer's designated location (domestic) on time, and the freight is borne by the supplier.

(c)The buyer provides equipment debugging materials to the supplier, and the cost incurred shall be borne by the buyer (material cost, freight).

(d)This product comes with a manual and a set of molds (if you need to customize other specifications of molds, the cost will be quoted separately).

(e)The demand side's production workshop shall provide power voltage, compressed air source and grounding devices that comply with electrical specifications; the demand side shall configure the cables and air pipes connected to the equipment by itself.

(f)The circulating cooling water, hydraulic oil (recommended to use No. 46 brand hydraulic oil), lubricating oil, and cooling oil required by the equipment shall be purchased by the buyer at his own discretion.

8. FAQ: 

Q: Are you a manufacturer or trading company? 
A: We are a manufacturer. We are focusing on metal pipe/tube processing machines production. 

Q: How to choose the pipe/tube bending machines?
A: You need to tell us the following tube parameters:
- Tube material
- Tube diameter
- Tube thickness
- Tube length
- Tube bending angle
- Tube drawings if possible

Q: What certificate do you have? 
We have both ISO and CE certificate. 

Q: How about your service? 
A: Before Sales Serive: 
(a)We will provide you with our professional tech.proposal and machine videos for your reference.
(b)We will try our best to answer all the questions and help you solve all the problems.
(c)Welcome to visit our factory!