1. Brief Introduction of Automatic Double Tubes Single Bend Bending Machine
(a)Process: automatic feeding (manually put into the hopper for discharge) → automatic processing (0-180 degree bending) → automatic return
(b)The quality of the equipment is reliable, the work is stable, and there is no bad action.
(c)Mould replacement and adjustment are convenient, reliable and durable
2. Equipment Parameter
| NO. |
Parameter items |
Content |
| 1 |
Processing material |
Hardened copper tube (TP2M) or hard tube |
| 2 |
Pipe diameter range |
φ6-9.52mm |
| 3 |
Pipe thickness range |
0.6-1.0mm |
| 4 |
Pipe length range |
50-250mm |
| 5 |
Work efficiency |
400-600PCS / H * 2 tube |
| 6 |
Number of elbows |
2 |
| 7 |
Maximum bending R radius |
R50mm |
| 8 |
Minimum bending R radius |
R10mm bending deformation rate is less than 12% |
| 9 |
Maximum bending angle |
185° |
| 10 |
Maximum rotation speed |
360°/S |
| 11 |
Repeated positioning accuracy (rotation) |
±0.1° |
| 12 |
Bending speed |
0-100 degrees / S |
| 13 |
Drive method |
Servo / Pneumatic |
| 14 |
Feeding method |
Auto feeding |
| 15 |
Operation method |
Auto / Manual / Jog |
| 16 |
Electric control mode |
CNC system |
| 17 |
air pressure |
0.5~0.8MPa |
| 18 |
Total power |
1KW |
| 19 |
Power mode |
Three phase380V/50HZ |
| 20 |
Overall dimensions (length X width X height) MM |
2200x900x1600 |
3. List of Main Parts
| NO. |
Name |
Quantity |
Brand |
| 1 |
CNC system |
1 set |
JISUN |
| 2 |
Servo motor |
1 set |
DELTA |
| 3 |
Switching power |
1 piece |
MW |
| 4 |
Pneumatic Original |
1 batch |
AIRTAC |
| 5 |
Contactor, thermal relay |
1 set |
TAIAN |
| 6 |
Planetary reducer |
1 set |
ZD |
| 7 |
Air-open and low-voltage appliances |
1 set |
CHINT |
| 8 |
Proximity switch |
1 batch |
YM |
4. Tube and Pipe Bending Samples
5. Tube and Pipe Bending Machine Maintenance
(a)Check the air / oil pressure and the condition of each fastener daily to ensure reliable use.
(b)Regularly lubricate moving parts and keep the equipment tidy.
(c)Clean the dust of the equipment regularly to avoid affecting the operation and product quality.
(d)The normal working time of the equipment is calculated from 8-10 hours per day. If the working time is longer due to production, the inspection and update of wearing parts, motors and other accessories should be strengthened to ensure the stability of the equipment.
6. Services and Others
(a)Product quality is guaranteed for one year, (except for man-made or abnormal use) wearing parts are not included in the scope of warranty. For details, please refer to the "Vulnerable Parts List" in the instruction manual.
(b)The products are delivered to the customer's designated location (domestic) on time, and the freight is borne by the supplier.
(c)The buyer provides equipment debugging materials to the supplier, and the cost incurred shall be borne by the buyer (material cost, freight).
(d)This product comes with a manual and a set of molds (if you need to customize other specifications of molds, the cost will be quoted separately).
(e)The demand side's production workshop shall provide power voltage, compressed air source and grounding devices that comply with electrical specifications; the demand side shall configure the cables and air pipes connected to the equipment by itself.
(f)The circulating cooling water, hydraulic oil (recommended to use No. 46 brand hydraulic oil), lubricating oil, and cooling oil required by the equipment shall be purchased by the buyer at his own discretion.
Company Profile
Our equipment is widely used in air conditioning, automobile, furniture, water heater, water treatment, medical, high -speed rail, aerospace and other industries, as well More than 200 types of automated equipment were developed.
The main products include all -in -one machines (feeding/pipe end/punching edges/bending pipes), automatic tube ending machine (expansion/shrinkage/rod/flower arrangement), feeder (dandruff/non -dandy), CNC pountyl (drilling) machine, CNC sealing machine, crushing machine, bending machine, automatic angle machine, tube tube machine, ultrasonic cleaning machine, automatic dehumin machine, automatic stuffy header, automatic scoring machine, automatic rolling roller, automatic roller roll Sink machines, pressure test machines, assembly machines, welding furnaces, retirement furnaces, flame welding, high -frequency welding machines, water inspection machines, automatic assembly slot machines, and above equipment can complete high -efficiency mass production for the factory conditions, and have it to have it to have Humanized operation design, stable equipment, simple maintenance, complete types and specifications, and customer provision of personalized design.
7. FAQ:
Q: Are you a manufacturer or trading company?
A: We are a manufacturer. We are focusing on metal pipe/tube processing machines production.
Q: How to choose the pipe/tube bending machines?
A: You need to tell us the following tube parameters:
- Tube material
- Tube diameter
- Tube thickness
- Tube length
- Tube bending angle
- Tube drawings if possible
Q: What certificate do you have?
We have both ISO and CE certificate.
Q: How about your service?
A: Before Sales Serive:
(a)We will provide you with our professional tech.proposal and machine videos for your reference.
(b)We will try our best to answer all the questions and help you solve all the problems.
(c)Welcome to visit our factory!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}