Automatic Straightening Scrapless Cutting Forming Machine for Pipeline Processing

• Customization: Available
• After-sales Service: Free Parts
• Drive Mode: Pneumatic/Servo
• Model NO.: JM-CF-M202E
• Automation: Automatic
• Warranty: 1 Year
• Cutting Material: Copper, Aluminum, Stainless Steel
• Automatic Grade: Fully-Automatic, Semi-Automatic
• Cutting Mode: Saw Cutting
• Suitable for: Copper
• Transport Package: Wooden Package
• Specification: 4130*800*1500mm
• Trademark: JISUN
• Origin: China
• HS Code: 8461500090
• Production Capacity: 200sets/Year

Product Description

Product Description

This equipment is suitable for batch straightening of disc-shaped copper pipes and processing without chipping into fixed-length, double-system operation.The installation of the electrical components of the equipment complies with the relevant national regulations and has a reliable grounding device. The terminals, contactors and small air switches in the electrical box are installed in the VDE standard V-groove. Each electrical component is clearly marked. The electric control cabinet uses all-plastic combing cabinets with wire trunking for clear wire numbers; the control panel is clean and the subtitles on the signs are clear and easy to see.

Detailed Photos

NO.	Name	Quantity	Brand
1	CNC system	1 set	JISUN
2	Cutting motor	2 set	GUANGZHOU MICROMOTOR
3	Pneumatic components	1 piece	AIRTAC
4	Leakage switch	1 piece	CHINT
5	Switching power	1 piece	MW
6	Intermediate relay	1 batch	OMRON
7	Proximity switch	1 batch	YM
8	Servo motor	2 set	DELTA
9	Lead screw	2 set	TBI

Product Parameters

NO.	Parameter items	Content
1	Pipe diameter range	φ5.0-15.88mm
2	Pipe thickness range	0.5-1.0mm
3	Station modulus	2+2
4	Number of feeding racks	2+2
5	Long material discharge method	Dedicated receiving tray
6	Short material discharge method	Receiving box
7	Cutting length range	40-4000mm (30-80mm break)
8	Work efficiency	5 times / minute (L = 500mm)
9	Concentricity of main axis	≤0.05mm
10	Length error	L≤1000mm;error≤ ± 0.3mm
		L> 1000mm;error≤ ± 0.4mm
11	Bevel error	≤0.1mm
12	Drive method	Servo / Pneumatic
13	Feeding method	Coil pipe
14	Operation method	Auto / Manual / Jog
15	Electric control mode	CNC system
16	air pressure	0.5~0.8MPa
17	Saw blade motor	Three phase380V/0.75KW*2
18	Total power	7KW
19	Power mode	Three phase380V/50HZ
20	Overall dimensions (length X width X height) mm	10000x900x1600

Machine Maintenance

1. Check the air / oil pressure and the condition of each fastener daily to ensure reliable use.
2. Regularly lubricate moving parts and keep the equipment tidy.
3. Clean the dust of the equipment regularly to avoid affecting the operation and product quality.
4. The normal working time of the equipment is calculated from 8-10 hours per day. If the working time is longer due to production, the inspection and update of wearing parts, motors and other accessories should be strengthened to ensure the stability of the equipment.

Services and Others

1. Product quality warranty for one year, (except for artificial or abnormal use) wearing parts are not included in the warranty scope. For details, please refer to the "wearing parts list" in the instruction manual.
2. You are very welcome to visit our factory to see our machine how to work before you place an order with us.
3. This product is delivered randomly: a manual and a set of molds (if other specifications are required, the cost will be quoted separately).
4. If customer have any question about operation when using our machine,we will reply you by email/telephone/other online chat tool within 24 hours.
5. The buyer needs to provide power voltage, compressed air gas source and grounding devices in accordance with electrical specifications on the site of the manufacturer's workshop; the buyer must configure the cables and air pipes connected to the equipment.
6. The circulating cooling water, hydraulic oil (recommended to use 46 brand hydraulic oil), lubricating oil and cooling oil required by the equipment are purchased by the purchaser.

Company Profile

FAQ

Q: Are you a manufacturer or trading company? 
A: Yes, we are a manufacturer. We are focusing on metal pipe/tube processing machines production. 

Q: How to choose the pipe/tube bending machines?
A: You need to tell us the following tube parameters:
- Tube material
- Tube diameter
- Tube thickness
- Tube length
- Tube bending angle
- Tube drawings if possible

Q: What certificate do you have? 
We have both ISO and CE certificate. 

Q: How about your service? 
A: Before Sales Serive: 
(a)We will provide you with our professional tech.proposal and machine videos for your reference.
(b)We will try our best to answer all the questions and help you solve all the problems.
(c)Welcome to visit our factory!